三菱化学PC聚碳酸酯塑料Iupilon™ H-2000UR UL黄卡物性参数-东莞市胜浩塑胶原料有限公司

您当前的位置：网站首页 > 产品展厅 >工程塑料 >三菱化学PC聚碳酸酯塑料Iupilon™ H-2000UR UL黄卡物性参数

三菱化学PC聚碳酸酯塑料Iupilon™ H-2000UR UL黄卡物性参数

起订量 (千克)价格

25-100￥27 /千克

100-1000￥26 /千克

≥1000￥25 /千克

品牌：日本三菱工程

货号：05131

发布日期： 2022-12-02
更新日期： 2025-10-31

发送咨询信息

产品详请

品牌	日本三菱工程
货号	05131
用途	注塑
牌号	H-2000UR
型号	H-2000UR
品名	PC
外形尺寸	颗粒
生产企业	日本三菱工程
是否进口	否

温馨提示：因橡塑行情波动太大，线上价格未能及时更新，更多详情及技术问题请来电咨询(微信同号）

Processing/Physical Characteristics Value Unit Test Standard

ISO Data

Melt volume-flow rate, MVR 20 cm3/10min ISO 1133

Temperature 300 °C -

Load 1.2 kg -

Melt flow index, MFI 22 g/10min ISO 1133

Temperature 300 °C -

Load 1.2 kg -

Molding shrinkage, parallel 0.6 % ISO 294-4, 2577

Molding shrinkage, normal 0.6 % ISO 294-4, 2577

Mechanical properties Value Unit Test Standard

ISO Data

Tensile Modulus 2400 MPa ISO 527

Yield stress 62 MPa ISO 527

Yield strain 6.6 % ISO 527

Strain at break 120 % ISO 527

Flexural modulus, 23°C 2300 MPa ISO 178

Flexural strength 93 MPa ISO 178

Charpy impact strength, +23°C N kJ/m2 ISO 179/1eU

Charpy notched impact strength, +23°C 60 kJ/m2 ISO 179/1eA

Thermal properties Value Unit Test Standard

ISO Data

Temp. of deflection under load, 1.80 MPa 124 °C ISO 75-1/-2

Temp. of deflection under load, 0.45 MPa 138 °C ISO 75-1/-2

Coeff. of linear therm. expansion, parallel 65 E-6/K ISO 11359-1/-2

Coeff. of linear therm. expansion, normal 66 E-6/K ISO 11359-1/-2

Electrical properties Value Unit Test Standard

ISO Data

Relative permittivity, 1MHz 3.1 - IEC 62631-2-1

Dissipation factor, 1MHz 90 E-4 IEC 62631-2-1

Volume resistivity 3E14 Ohm*m IEC 62631-3-1

Surface resistivity 6E15 Ohm IEC 62631-3-2

Electric strength 31 kV/mm IEC 60243-1

Comparative tracking index 325 - IEC 60112

Other properties Value Unit Test Standard

Water absorption 0.24 % Sim. to ISO 62

Density 1200 kg/m3 ISO 1183

Processing Recommendation Injection Molding Value Unit Test Standard

Pre-drying - Temperature 120 °C -

Pre-drying - Time 4 - 8 h -

Mold temperature 70 - 100 °C -

Zone 1 270 - 290 °C -

Zone 2 270 - 290 °C -

Zone 3 270 - 290 °C -

Nozzle temperature 270 - 290 °C -

Characteristics

Processing

Injection Molding

Additives

Release agent

Special Characteristics

Light stabilized or stable to light, U.V. stabilized or stable to weather

Applications

General Purpose

Regional Availability

North America, Europe, Asia Pacific, South and Central America, Near East/Africa

Other properties	Value	Unit	Test Standard
Water absorption	0.24	%	Sim. to ISO 62
Density	1200	kg/m3	ISO 1183

Processing Recommendation Injection Molding	Value	Unit	Test Standard
Pre-drying - Temperature	120	°C	-
Pre-drying - Time	4 - 8	h	-
Mold temperature	70 - 100	°C	-
Zone 1	270 - 290	°C	-
Zone 2	270 - 290	°C	-
Zone 3	270 - 290	°C	-
Nozzle temperature	270 - 290	°C	-