杜邦LCP 5145L 液晶聚合物高分子材料耐高温电子元件专用塑料可焊锡塑料-东莞市胜浩塑胶原料有限公司

您当前的位置：网站首页 > 产品展厅 >工程塑料 >杜邦LCP 5145L 液晶聚合物高分子材料耐高温电子元件专用塑料可焊锡塑料

杜邦LCP 5145L 液晶聚合物高分子材料耐高温电子元件专用塑料可焊锡塑料

起订量 (千克)价格

25-500￥72 /千克

500-1000￥71 /千克

≥1000￥70 /千克

品牌：杜邦

货号：05131

发布日期： 2022-11-29
更新日期： 2025-11-20

发送咨询信息

产品详请

品牌	杜邦
货号	05131
用途	注塑
牌号	5145L
型号	5145L
品名	LCP
外形尺寸	颗粒
生产企业	杜邦
是否进口	是

温馨提示：因橡塑行情波动太大，线上价格未能及时更新，更多详情及技术问题请来电咨询(微信同号）

ZENITE® 5145L | LCP-GF45 | Celanese

Product Texts

Zenite® 5145L is a 45% glass fiber reinforced and toughened liquid crystal polymer for injection molding. It has improved toughness.

Flammability @1.6mm nom. thickn. V-0 -

Flammability at thickness h (0.8 mm) V-0 UL recognition (h)

Rheological properties Value Unit Test Standard

Molding shrinkage, parallel 0.1 % ISO 294-4, 2577

Molding shrinkage, normal 0.5 % ISO 294-4, 2577

Mechanical properties Value Unit Test Standard

Tensile modulus 15000 MPa ISO 527-1/-2

Stress at break 115 MPa ISO 527-1/-2

Strain at break 3.1 % ISO 527-1/-2

Thermal properties Value Unit Test Standard

Melting temperature, 10°C/min 319 °C ISO 11357-1/-3

Temp. of deflection under load, 1.80 MPa 290 °C ISO 75-1/-2

Coeff. of linear therm. expansion, parallel 7 E-6/K ISO 11359-1/-2

Coeff. of linear therm. expansion, normal 60 E-6/K ISO 11359-1/-2

Burning behavior at 1.5 mm nominal thickness V-0 class IEC 60695-11-10

Thickness tested (1.5) 1.5 mm IEC 60695-11-10

Burning behavior at thickness h V-0 class IEC 60695-11-10

Thickness tested (h) 0.8 mm IEC 60695-11-10

Yellow Card available Yes - -

Oxygen index 33 % ISO 4589-1/-2

Electrical properties Value Unit Test Standard

Relative permittivity, 1MHz 3.9 - IEC 62631-2-1

Dissipation factor, 1MHz 180 E-4 IEC 62631-2-1

Volume resistivity 1E13 Ohm*m IEC 62631-3-1

Surface resistivity 1E15 Ohm IEC 62631-3-2

Electric strength 45 kV/mm IEC 60243-1

Other properties Value Unit Test Standard

Density 1750 kg/m3 ISO 1183

Rheological calculation properties Value Unit Test Standard

Density of melt 1480 kg/m3 -

Thermal conductivity of melt 0.35 W/(m K) -

Spec. heat capacity melt 1500 J/(kg K) -

Ejection temperature 265 °C -

Flammability @1.6mm nom. thickn.	V-0	-
Flammability at thickness h (0.8 mm)	V-0	UL recognition (h)

Rheological properties	Value	Unit	Test Standard
Molding shrinkage, parallel	0.1	%	ISO 294-4, 2577
Molding shrinkage, normal	0.5	%	ISO 294-4, 2577

Mechanical properties	Value	Unit	Test Standard
Tensile modulus	15000	MPa	ISO 527-1/-2
Stress at break	115	MPa	ISO 527-1/-2
Strain at break	3.1	%	ISO 527-1/-2

Thermal properties	Value	Unit	Test Standard
Melting temperature, 10°C/min	319	°C	ISO 11357-1/-3
Temp. of deflection under load, 1.80 MPa	290	°C	ISO 75-1/-2
Coeff. of linear therm. expansion, parallel	7	E-6/K	ISO 11359-1/-2
Coeff. of linear therm. expansion, normal	60	E-6/K	ISO 11359-1/-2
Burning behavior at 1.5 mm nominal thickness	V-0	class	IEC 60695-11-10
Thickness tested (1.5)	1.5	mm	IEC 60695-11-10
Burning behavior at thickness h	V-0	class	IEC 60695-11-10
Thickness tested (h)	0.8	mm	IEC 60695-11-10
Yellow Card available	Yes	-	-
Oxygen index	33	%	ISO 4589-1/-2

Electrical properties	Value	Unit	Test Standard
Relative permittivity, 1MHz	3.9	-	IEC 62631-2-1
Dissipation factor, 1MHz	180	E-4	IEC 62631-2-1
Volume resistivity	1E13	Ohm*m	IEC 62631-3-1
Surface resistivity	1E15	Ohm	IEC 62631-3-2
Electric strength	45	kV/mm	IEC 60243-1

Other properties	Value	Unit	Test Standard
Density	1750	kg/m3	ISO 1183

Rheological calculation properties	Value	Unit	Test Standard
Density of melt	1480	kg/m3	-
Thermal conductivity of melt	0.35	W/(m K)	-
Spec. heat capacity melt	1500	J/(kg K)	-
Ejection temperature	265	°C	-