|
加纤30%耐水解PA66 Dupont Zytel 70G30HSLR NC010热稳定性尼龙66树脂
- 起订量 (千克)价格
- 25-100￥48 /千克
- 100-1000￥47 /千克
- ≥1000￥46 /千克
- 品牌：杜邦
- 货号：05131
- 发布日期： 2022-11-28
- 更新日期： 2025-11-15
产品详请
| 品牌 | 杜邦 |
| 货号 | 05131 |
| 用途 | 注塑 |
| 牌号 | 70G30HSLR NC010 |
| 型号 | 70G30HSLR NC010 |
| 品名 | PA66 |
| 外形尺寸 | 颗粒 |
| 生产企业 | 杜邦 |
| 是否进口 | 是 |
温馨提示：因橡塑行情波动太大，线上价格未能及时更新，更多详情及技术问题请来电咨询(微信同号）
特性：加纤30%、热稳定性、耐水解，本色NC010色号，黑色BK099色号。
用途：注塑成型，汽车，家具，家用电器。
Zytel® 70G30HSLR NC010 is a 30% glass fiber reinforced, heat stabilized, hydrolysis resistant polyamide 66 resin for injection molding.
| Rheological properties | dry / cond | Unit | Test Standard |
| Molding shrinkage, parallel | 0.3 / * | % | ISO 294-4, 2577 |
| Molding shrinkage, normal | 1.1 / * | % | ISO 294-4, 2577 |
| Mechanical properties | dry / cond | Unit | Test Standard |
| Tensile modulus | 10000 / 7000 | MPa | ISO 527-1/-2 |
| Stress at break | 200 / 130 | MPa | ISO 527-1/-2 |
| Strain at break | 3.3 / 5 | % | ISO 527-1/-2 |
| Tensile creep modulus, 1h | * / 6800 | MPa | ISO 899-1 |
| Tensile creep modulus, 1000h | * / 5100 | MPa | ISO 899-1 |
| Charpy impact strength, +23°C | 70 / 80 | kJ/m2 | ISO 179/1eU |
| Charpy impact strength, -30°C | 70 / 70 | kJ/m2 | ISO 179/1eU |
| Charpy notched impact strength, +23°C | 12 / 15 | kJ/m2 | ISO 179/1eA |
| Charpy notched impact strength, -30°C | 10 / 10 | kJ/m2 | ISO 179/1eA |
| Thermal properties | dry / cond | Unit | Test Standard |
| Melting temperature, 10°C/min | 262 / * | °C | ISO 11357-1/-3 |
| Glass transition temperature, 10°C/min | 75 / * | °C | ISO 11357-1/-2 |
| Temp. of deflection under load, 1.80 MPa | 253 / * | °C | ISO 75-1/-2 |
| Temp. of deflection under load, 0.45 MPa | 261 / * | °C | ISO 75-1/-2 |
| Vicat softening temperature, 50°C/h 50N | 250 / * | °C | ISO 306 |
| Coeff. of linear therm. expansion, parallel | 26 / * | E-6/K | ISO 11359-1/-2 |
| Coeff. of linear therm. expansion, normal | 80 / * | E-6/K | ISO 11359-1/-2 |
| Burning behavior at 1.5 mm nominal thickness | HB / * | class | IEC 60695-11-10 |
| Thickness tested (1.5) | 1.5 / * | mm | IEC 60695-11-10 |
| Yellow Card available | Yes / * | - | - |
| Burning behavior at thickness h | HB / * | class | IEC 60695-11-10 |
| Thickness tested (h) | 0.8 / * | mm | IEC 60695-11-10 |
| Yellow Card available | Yes / * | - | - |
| Burning rate, thickness 1 mm | 24 | mm/min | ISO 3795 (FMVSS 302) |
| FMVSS | SE/B | - | ISO 3795 (FMVSS 302) |
| Oxygen index | 24 / * | % | ISO 4589-1/-2 |
| Electrical properties | dry / cond | Unit | Test Standard |
| Relative permittivity, 100Hz | 4.3 / 11 | - | IEC 62631-2-1 |
| Relative permittivity, 1MHz | 4.1 / 4.6 | - | IEC 62631-2-1 |
| Dissipation factor, 100Hz | 70 / 4600 | E-4 | IEC 62631-2-1 |
| Dissipation factor, 1MHz | 150 / 650 | E-4 | IEC 62631-2-1 |
| Volume resistivity | >1E13 / 1E9 | Ohm*m | IEC 62631-3-1 |
| Surface resistivity | * / 1E13 | Ohm | IEC 62631-3-2 |
| Electric strength | 38 / 32 | kV/mm | IEC 60243-1 |
| Comparative tracking index | 450 / - | - | IEC 60112 |
| Other properties | dry / cond | Unit | Test Standard |
| Water absorption | 6 / * | % | Sim. to ISO 62 |
| Humidity absorption | 1.9 / * | % | Sim. to ISO 62 |
| Density | 1370 / - | kg/m3 | ISO 1183 |
| Material specific properties | dry / cond | Unit | Test Standard |
| Viscosity number | 150 / * | cm3/g | ISO 307, 1157, 1628 |
| Rheological calculation properties | Value | Unit | Test Standard |
| Density of melt | 1200 | kg/m3 | - |
| Thermal conductivity of melt | 0.21 | W/(m K) | - |
| Spec. heat capacity melt | 2290 | J/(kg K) | - |
| Eff. thermal diffusivity | 1.1E-7 | m2/s | - |
| Ejection temperature | 210 | °C | - |
